Aviator 2.2 Check Helmet

Aviator 2.2 Double Orange Gloss Helmet

Aviator 2.2 Edge Helmet

Aviator 2.2 Flash Helmet - Various Colours

Aviator 2.2 Racr Helmet

Aviator 2.2 Revolve Helmet

Aviator 2.3 Bigger Helmet with AMS

Airoh Aviator 2.3 Great Motocross Helmet Champions never stop, there is always a new goal, a new challenge to drive a new circuit. The Aviator 2.3 is the new version of off-road helmets and introduces key technological innovations (patented by Airoh) that enhance driving experience and safety. The Aviator 2.3 is a unique model that sets new standards in comfort, breathability and protection. The complete safety offered by Carbon Kevlar, a material that reduces weight and maximizes resistance, is supported by two Airoh patented systems: A.E.F.R. for quick pad removal, and AMS2, the most advanced guard that made its debut in the Airoh Lines with Aviator 2.3. Another important news in version 2.3 is the new inner side magnetic locking system, which allows both locking and easy removal when desired. A new range of aggressive and charismatic graphics and colors bring out the Aviator 2.3 in every situation. The wide field of view, the ventilation system with air inlet opening on both the front and back as well as on the chin part are the complete revolution of the new aviator. Features: Material: Carbon Kevlar Weight: from 1070 g (+/- 50 g) Outer shell: 2 sizes (XS-S-M, L-XL) Ventilation: front, top, rear, chin guard Visor: no Sun Visor: no Inner lining: removable, washable, anti-allergic Closure system: double-D Included accessories: GoPro kit, upper vent cover, extended peak, screws set, Airoh logos, clousure kit, Airoh helmet bag

Airoh Aviator 2.3 Novak Motocross Helmet Race with just one aim in mind. Winning. Your Aviator 2.3 will let you. It is your best ally since it was developed and continuously improved over the years through constant feedback collected from racetracks. Aviator 2.3 has your same goals, it shares your identical passion, nurtures your same ambition. It is technically excellent; 100% carbon Kevlar shell, AMS2 (Airoh Multiaction Safety System), AMLS (Airoh Magnetic Lining System), AEFR (Airoh Emergency Fast Release) and also the Hydra System. A complex system channelling the air flows will allow you to race in the best conditions possible, searching for the perfect performance. Amazing accessories supplied: helmet bag, peak extension, spare screw kit, GoPro kit, cover air vents kit. Features: AMS2 (Airoh Multiaction Safety System) AMLS (Airoh Magnetic Lining System) Inner lining breathable, hypoallergenic and removable Specifications: Material: 100% carbon aramid Weight: from 1070 g (+/- 50 g) Outer shell: 2 sizes (XS-S-M, L-XL) Ventilation: top, side, rear, chin protection Locking system: Double-D Safety standard: ECE 2205 Visor: Racing Visor Contents: 1x Airoh helmet 1x helmet bag 1x spare screws 1x GoPro Kit

Airoh Aviator 2.3 Replica Cairoli 2020 Motocross Helmet Champions never stop, there is always a new goal, a new challenge to drive a new circuit. The Aviator 2.3 is the new version of off-road helmets and introduces key technological innovations (patented by Airoh) that enhance driving experience and safety. The Aviator 2.3 is a unique model that sets new standards in comfort, breathability and protection. The complete safety offered by Carbon Kevlar, a material that reduces weight and maximizes resistance, is supported by two Airoh patented systems: A.E.F.R. for quick pad removal, and AMS2, the most advanced guard that made its debut in the Airoh Lines with Aviator 2.3. Another important news in version 2.3 is the new inner side magnetic locking system, which allows both locking and easy removal when desired. A new range of aggressive and charismatic graphics and colors bring out the Aviator 2.3 in every situation. The wide field of view, the ventilation system with air inlet opening on both the front and back as well as on the chin part are the complete revolution of the new aviator. Features: Material: Carbon Kevlar Weight: from 1070 g (+/- 50 g) Outer shell: 2 sizes (XS-S-M, L-XL) Ventilation: front, top, rear, chin guard Visor: no Sun Visor: no Inner lining: removable, washable, anti-allergic Closure system: double-D Included accessories: GoPro kit, upper vent cover, extended peak, screws set, Airoh logos, clousure kit, Airoh helmet bag Contents: 1 x Airoh helmet 1 x helmet bag 1 x upper vent cover 1 x extended peak GoPro kit, screws set, clousure kit and Airoh logos included

Airoh Aviator 2.3 Six days Portugal Limited Edition Motocross Helmet Driving with only one goal in mind. Win. Your Aviator 2.3 makes it possible. It is your best ally because it has been developed and improved over the years through constant feedback collected on race tracks. Aviator 2.3 has the same goal as you, shares the same passion, has the same ambitions as you. The technical equipment is first class: shell made of 100% Carbon Aramid, AMS2 (Airoh Multiaction Safety System), AMLS (Airoh Magnetic Lining System), (Airoh Emergency Fast Release). A complex system of air ducts allows you to ride in the best possible conditions in search of the perfect performance. Impressive features: helmet bag, parasol extension, spare screw set, GoPro kit, air outlet cover kit. But the Aviator 2.3 Six Days Portugal doesn't only impress with its equipment, its cool glossy design also makes it something special! Features: AMS2 (Airoh Multiaction Safety System) AMLS (Airoh Magnetic Lining System) Inner lining breathable, hypoallergenic and removable Specifications: Material: 100% carbon aramid Weight: from 1070 g (+/- 50 g) Outer shell: 2 sizes (XS-S-M, L-XL) Ventilation: top, side, rear, chin protection Locking system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag 1x spare screws 1x GoPro Kit

Airoh Twist 2.0 Motocross Helmet It seemed impossible, but we were able to improve a best seller. Now the Twist 2.0 is more performing and more aggressive while remaining incredibly light. The HRT (High Resistant Thermoplastic) shell boasts as many as 2 EPS to ensure the best fitting, and now features a rear spoiler that improves the aerodynamics, making the Twist 2.0 amazingly stable even at high speeds. It also conceals a formidable internal upgrade: the new ASN system (Airoh Sliding Net), which allows the inner-lining to slide in the event of an impact and to guarantee an extraordinary ventilation for its everyday use. The adjustable peak with an extension, the sophisticated airflow ventilation system, the dust filter and the DD-Rings retention system create the perfect mix for its success. Features: Rear spoilers which improve aerodynamics adjustable sunshade EPS double system ASN system (Airoh Sliding Net) Inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1240 g (+/- 50 g) Outer shell: 1 size (XS-XXL) Ventilation: top, side, rear, chin protection Closure system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

Airoh Twist 2.0 Frame Motocross Helmet It seemed impossible, but we were able to improve a best seller. Now the Twist 2.0 is more performing and more aggressive while remaining incredibly light. The HRT (High Resistant Thermoplastic) shell boasts as many as 2 EPS to ensure the best fitting, and now features a rear spoiler that improves the aerodynamics, making the Twist 2.0 amazingly stable even at high speeds. It also conceals a formidable internal upgrade: the new ASN system (Airoh Sliding Net), which allows the inner-lining to slide in the event of an impact and to guarantee an extraordinary ventilation for its everyday use. The adjustable peak with an extension, the sophisticated airflow ventilation system, the dust filter and the DD-Rings retention system create the perfect mix for its success. Features: Rear spoilers which improve aerodynamics adjustable sunshade EPS double system ASN system (Airoh Sliding Net) Inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1240 g (+/- 50 g) Outer shell: 1 size (XS-XXL) Ventilation: top, side, rear, chin protection Closure system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

Airoh Twist 2.0 Motocross Helmet It seemed impossible, but we were able to improve a best seller. Now the Twist 2.0 is more performing and more aggressive while remaining incredibly light. The HRT (High Resistant Thermoplastic) shell boasts as many as 2 EPS to ensure the best fitting, and now features a rear spoiler that improves the aerodynamics, making the Twist 2.0 amazingly stable even at high speeds. It also conceals a formidable internal upgrade: the new ASN system (Airoh Sliding Net), which allows the inner-lining to slide in the event of an impact and to guarantee an extraordinary ventilation for its everyday use. The adjustable peak with an extension, the sophisticated airflow ventilation system, the dust filter and the DD-Rings retention system create the perfect mix for its success. Features: Rear spoilers which improve aerodynamics adjustable sunshade EPS double system ASN system (Airoh Sliding Net) Inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1240 g (+/- 50 g) Outer shell: 1 size (XS-XXL) Ventilation: top, side, rear, chin protection Closure system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

Twist Freedom MX Helmet

Twist Mix MX Helmet

Airoh Twist Shading Motocross Helmet The Twist is a motocross helmet made of HRT-Thermoplastic (High Resistant Termoplastic) for the demanding motorcyclist. The shell's incredibly low weight and aggressive look make it popular with the most daring riders and are always at the center of all the two-wheeler challenges. The highly breathable, removable and washable inner padding ensure unparalleled comfort. Of great advantage in intensive off-road use are the adjustable screen and the dust filter. The whole thing is rounded off by the restraint system with double D-rings, which also ensures high safety and comfort in risk situations. Features: Material: Thermoplastic (HRT) Weight: from 1180 g (+/- 50 g) Outer shell: 1 size Ventilation: front, rear, chin guard Visor: no Sun Visor: no Inner lining: removable, washable, anti-allergic Closure system: double-D Included accessories: - Technologies: Adjustable Visor: Allows individual adjustment of the visor to use the helmet in all conditions. Aggressive design: Special lines with a modern and aggressive character, so as not to go unnoticed. Extra Wide Vision: Wide field of view, which provides a better overview due to the additional lateral surface, thus improving active safety.

Airoh Wraap Color Motocross Helmet The passion for going off road never gets old. Ultralight HRT (High Resistant Thermoplastic) shell in three different sizes. The innovative double EPS system with variable density complies with the highest safety standards, just like for high-end helmets. Hypoallergenic and removable inner-lining, DD-Rings retention system for maximum safety, and stylish and aggressive graphics to be always one step ahead. Features: EPS double system ASN system (Airoh Sliding Net) inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1190 g (+/- 50 g) Outer shell: 3 sizes Ventilation: top, side, rear, chin protection Locking system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

Airoh Wraap Broken Motocross Helmet The passion for going off road never gets old. Ultralight HRT (High Resistant Thermoplastic) shell in three different sizes. The innovative double EPS system with variable density complies with the highest safety standards, just like for high-end helmets. Hypoallergenic and removable inner-lining, DD-Rings retention system for maximum safety, and stylish and aggressive graphics to be always one step ahead. Features: EPS double system ASN system (Airoh Sliding Net) inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1190 g (+/- 50 g) Outer shell: 3 sizes Ventilation: top, side, rear, chin protection Locking system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

Airoh Wraap Pin Up Motocross Helmet The passion for going off road never gets old and the new Airoh helmet wants to be the best way to bring young people closer to this world. Ultralight HRT (High Resistant Thermoplastic) shell in three different sizes to suit every size, even the youngest Airohriders thanks to the Regular and Slim versions. The innovative double EPS system with variable density complies with the highest safety standards, just like for high-end helmets. Hypoallergenic and removable inner-lining, DD-Rings retention system for maximum safety, and stylish and aggressive graphics to be always one step ahead. Features: EPS double system ASN system (Airoh Sliding Net) inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1190 g (+/- 50 g) Outer shell: 3 sizes Ventilation: top, side, rear, chin protection Locking system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

Airoh Wraap Smile Motocross Helmet The passion for going off road never gets old. Ultralight HRT (High Resistant Thermoplastic) shell in three different sizes. The innovative double EPS system with variable density complies with the highest safety standards, just like for high-end helmets. Hypoallergenic and removable inner-lining, DD-Rings retention system for maximum safety, and stylish and aggressive graphics to be always one step ahead. Features: EPS double system ASN system (Airoh Sliding Net) inner lining breathable, hypoallergenic and removable Specifications: Material: HRT shell (High Resistant Thermoplastic) Weight: from 1190 g (+/- 50 g) Ventilation: top, side, rear, chin protection Locking system: Double-D Safety standard: ECE 2205 Contents: 1x Airoh helmet 1x helmet bag

AR-1 Fog White Edge Helmet

AR-1 Fog White Edge Youth Helmet

The answer racing ar-1 helmet is our best value helmet ever, all while passing two of the toughest safety standards by exceeding d.O.T. And ece . A dual-density eps liner helps to absorb both large and small impacts while a highly developed ventilation system consisting of two large intake ports and four large exhaust ports help keep you cool in the hottest conditions. Meets or exceeds d.O.T. Fmvss 218 safety standard Meets or exceeds both ece 22-05 and d.O.T. Fmvss 218 safety standards Shell made of injection molded acrylonitrile butadiene styrene (abs) sculptured, dual-density, eps impact absorbing liner Removable/washable liner is made with moisture wicking fabrics Flexible rubber nose piece helps deflect roost Two large front air intakes and four rear exhaust vents help keep you cool Weighs 3.15 lbs / 1428 grams (size large)

The answer racing ar-1 helmet is our best value helmet ever, all while passing two of the toughest safety standards by exceeding d.O.T. And ece . A dual-density eps liner helps to absorb both large and small impacts while a highly developed ventilation system consisting of two large intake ports and four large exhaust ports help keep you cool in the hottest conditions. Meets or exceeds d.O.T. Fmvss 218 safety standard Meets or exceeds both ece 22-05 and d.O.T. Fmvss 218 safety standards Shell made of injection molded acrylonitrile butadiene styrene (abs) sculptured, dual-density, eps impact absorbing liner Removable/washable liner is made with moisture wicking fabrics Flexible rubber nose piece helps deflect roost Two large front air intakes and four rear exhaust vents help keep you cool Weighs 3.15 lbs / 1428 grams (size large)

MX-V Navy Blue MX Helmet

The MX-V evolved from the much loved VX-3 model. Years of experience can be found in this ultimate off road helmet. The perfect choice for MX, Enduro and Off-road use. Just as found in every Arai helmet, the basic and simple organic shell shape is based on the R75 Shape concept. The absence of exaggerated edges or protrusions on the shell is not a lack of creativity, but a commitment to maintaining the integrity of a rounder, stronger and smoother shell.

The latest expression of the ultimate off-road helmet, the brand new VX-Pro4 evolved from the much-loved VX-Pro3 model. So it’s still the perfect choice for MX, enduro and off-road use. Just as in every Arai helmet, the basic and simple organic shell shape is based on the R75 shape concept. The absence of exaggerated edges or protrusions on the shell should not be mistaken for a lack of imagination. It’s a visual demonstration of our commitment to maintaining the integrity of the shell with real-world impact performance.

The latest expression of the ultimate off-road helmet, the brand new VX-Pro4 evolved from the much-loved VX-Pro3 model. So it’s still the perfect choice for MX, enduro and off-road use. Just as in every Arai helmet, the basic and simple organic shell shape is based on the R75 shape concept. The absence of exaggerated edges or protrusions on the shell should not be mistaken for a lack of imagination. It’s a visual demonstration of our commitment to maintaining the integrity of the shell with real-world impact performance.

PROGRESSIVE PROTECTION

Ever since the first Bell helmet, our ongoing mission has been to innovate and improve the science of protection, always striving to bring technologies to the table that set the benchmark for impact and energy management. Meet the Moto-9 Flex evolution of the fittest. A first-of-its-kind, three-layer impact liner utilizes multiple densities of material to more comprehensively disperse impact energy and works to reduce rotational energy transfer. Moto-9s flexible, segmented liner achieves an adaptive, more personalized fit for a wider variety of head shapes, and allows us to deliver superior ventilation throughout the helmet. The Moto-9 Flex is the most advanced helmet we have ever made, and is setting the standard for rider protection in motocross and off-road racing.

PROGRESSIVE PROTECTION

Ever since the first Bell helmet, our ongoing mission has been to innovate and improve the science of protection, always striving to bring technologies to the table that set the benchmark for impact and energy management. Meet the Moto-9 Flex evolution of the fittest. A first-of-its-kind, three-layer impact liner utilizes multiple densities of material to more comprehensively disperse impact energy and works to reduce rotational energy transfer. Moto-9s flexible, segmented liner achieves an adaptive, more personalized fit for a wider variety of head shapes, and allows us to deliver superior ventilation throughout the helmet. The Moto-9 Flex is the most advanced helmet we have ever made, and is setting the standard for rider protection in motocross and off-road racing.

PROGRESSIVE PROTECTION

Ever since the first Bell helmet, our ongoing mission has been to innovate and improve the science of protection, always striving to bring technologies to the table that set the benchmark for impact and energy management. Meet the Moto-9 Flex evolution of the fittest. A first-of-its-kind, three-layer impact liner utilizes multiple densities of material to more comprehensively disperse impact energy and works to reduce rotational energy transfer. Moto-9s flexible, segmented liner achieves an adaptive, more personalized fit for a wider variety of head shapes, and allows us to deliver superior ventilation throughout the helmet. The Moto-9 Flex is the most advanced helmet we have ever made, and is setting the standard for rider protection in motocross and off-road racing.

The legendary Moto-9 continues to dominate MX tracks around the globe. Weve added MIPS energy-absorbing technology to this proven performer, enhancing already stellar protection. An extensive list of features Tri-Matrix Shell, Velocity Flow Ventilation, X-Static Liner, Flying Bridge Visor, Magnetic Cheekpads/Strap Keeper, and an Industry-leading five-year warranty ensures the Moto-9 is as ready as you are when the gate drops.

The legendary Moto-9 continues to dominate MX tracks around the globe. Weve added MIPS energy-absorbing technology to this proven performer, enhancing already stellar protection. An extensive list of features Tri-Matrix Shell, Velocity Flow Ventilation, X-Static Liner, Flying Bridge Visor, Magnetic Cheekpads/Strap Keeper, and an Industry-leading five-year warranty ensures the Moto-9 is as ready as you are when the gate drops.

The off-road world is a dirty, tough place. Chunks of rock and dirt mean business when launched by roosting tires, and even when its muddy, hitting the ground is always hard. Thats why we sweated the details on the MX-9, loading it with a tough polycarbonate shell, MIPS energy management system, an adjustable visor, Velocity Flow ventilation, and a removable, washable, anti-microbial liner for when the time comes to hose down. The MX-9 MIPS packs all these features into one helmet, delivering exceptional value and pro-caliber performance.

T5 Ecto Helmet

Faseed 608 Youth MX Helmet

Elite Vigilant Helmet

F2 Mips Shield Helmet - Various Colours

Kinetic Burnish Helmet

Kinetic Crux Youth Helmet - Various Colours

The FLY Original Kinetic helmet offers exceptional fit, quality workmanship and bold original artwork. Inside and out the long list of features, including FLY's signature ventilation system and removable comfort liner, make it one of the most popular helmets in FLY's line. Construction: Durable and lightweight polymer shell. Dual-density EPS (expanded polystyrene) liner. Custom molded rubber trim with integrated nose guard. Three shells and four EPS sizes provide a precise fit. Comfort / Liner: Removable and washable comfort liner and cheek pads absorb sweat while providing ventilation. Ventilation: All FLY helmets have TFV (True Functional Ventilation): When in motion, air is forced through multiple air intake vents, then passed through aligned vent channels in the EPS and exits out multiple rear exhaust vents. High-flow mouthpiece is replaceable. Included Accessories: Soft fleece helmet bag. Standard: DOT approved.

Kinetic Sharp Helmet

The Fly Racing Kinetic Helmet delivers excellent performance and protection thanks to the poly-alloy shell construction which helps create a durable yet lightweight helmet. The dual density EPS liner is comprised of two layers of EPS (Expanded Polystyrene), one softer and one slightly harder, which combine to provide more progressive impact absorption for different levels of impact. Designed to keep you cool, the Kinetic Helmet utilizes the True Function Ventilation system which promotes maximum airflow. FEATURES: Durable and lightweight polymer shell construction Dual density EPS liner TFV (True Functional Ventilation) includes multiple intake and exhaust vents that create massive airflow to keep your head cool Flow through EPS (Expanded Polystyrene) and comfort liner air system align to maximize airflow Removable and washable comfort liner and cheek pads Custom molded rubber trim with nose guard DOT approved

The Fly Racing Kinetic Helmet delivers excellent performance and protection thanks to the poly-alloy shell construction which helps create a durable yet lightweight helmet. The dual density EPS liner is comprised of two layers of EPS (Expanded Polystyrene), one softer and one slightly harder, which combine to provide more progressive impact absorption for different levels of impact. Designed to keep you cool, the Kinetic Helmet utilizes the True Function Ventilation system which promotes maximum airflow. FEATURES: Durable and lightweight polymer shell construction Dual density EPS liner TFV (True Functional Ventilation) includes multiple intake and exhaust vents that create massive airflow to keep your head cool Flow through EPS (Expanded Polystyrene) and comfort liner air system align to maximize airflow Removable and washable comfort liner and cheek pads Custom molded rubber trim with nose guard DOT approved

FOX V1 Prix Motocross Helmet Ounce for ounce, the V1 Prix helmet is one of the most competitive motocross helmets in the market. It features the FOX exclusive Magnetic Visor Release System™ (MVRS) which helps to manage rotational forces. The visor is designed to release from the helmet in the event of a crash while staying securely in place when needed. The design offers best-in-class airflow for improved comfort and moisture management. With four specific shell and EPS sizes, it has a more true-to-size fit and feel. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. Features: Magnetic Visor Release System (MVRS)™ releases in the event of a crash Lightweight Injection molded polycarbonate & ABS shell construction disperses energy in the event of a crash 4 shell and 4 EPS sizes for a precise fit Removable and washable comfort liner and cheek pads 9 intake and 4 exhaust vents for optimum airflow Exceeds ECE 22.05 standards Gloss finish

FOX V1 PRZM Motocross Helmet The all-new V1 Przm helmet has been redesigned from the ground up. It now features our exclusive Magnetic Visor Release System (MVRS) to manage rotational forces. This pro-level, patent-pending feature removes the three visor screws and replaces them with magnets to allow the visor to release from the helmet in the event of a crash, while also securely staying in place when needed. The design offers far more airflow than its predecessors for improved comfort and moisture management in warm riding conditions. We have also introduced 4 specific shell and EPS sizes for a more true-to-size fit and feel. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. And of course, it has a brand-new aesthetic and is available in a wide selection of colors and graphics to match nearly any gear set available. Features: MVRS - Magnetic Visor Release System releases in the event of a crash Lightweight Injection molded polycarbonate & ABS shell construction 4 shell and 4 EPS sizes for a precise fit Removable and washable comfort liner and cheek pads 9 intake and 4 exhaust vents for optimum airflow Matching 180 Przm gear set available Gloss Finish Exceeds DOT

FOX V1 PRZM Motocross Helmet The all-new V1 Przm helmet has been redesigned from the ground up. It now features our exclusive Magnetic Visor Release System (MVRS) to manage rotational forces. This pro-level, patent-pending feature removes the three visor screws and replaces them with magnets to allow the visor to release from the helmet in the event of a crash, while also securely staying in place when needed. The design offers far more airflow than its predecessors for improved comfort and moisture management in warm riding conditions. We have also introduced 4 specific shell and EPS sizes for a more true-to-size fit and feel. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. And of course, it has a brand-new aesthetic and is available in a wide selection of colors and graphics to match nearly any gear set available. Features: MVRS - Magnetic Visor Release System releases in the event of a crash Lightweight Injection molded polycarbonate & ABS shell construction 4 shell and 4 EPS sizes for a precise fit Removable and washable comfort liner and cheek pads 9 intake and 4 exhaust vents for optimum airflow Matching 180 Przm gear set available Gloss Finish Exceeds DOT

The all-new V1 Youth PRZM helmet has been redesigned from the ground up. It now features our the Magnetic Visor Release System (MVRS) to manage rotational forces. This pro-level, patent-pending feature removes the three visor screws and replaces them with magnets to allow the visor to release from the helmet in the event of a crash, while also securely staying in place when needed. The design offers far more airflow than its predecessors for improved comfort and moisture management in warm riding conditions. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. And of course, it has a brand-new aesthetic and is available in a wide selection of colors and graphics to match nearly any gear set available. Features: MVRS - Magnetic Visor Release System releases in the event of a crash lightweight injection molded polycarbonate & ABS (acrylnitril-butadien-styrol-copolymer) shell construction 1 shell and 1 EPS size removable and washable comfort liner and cheek pads 9 intake and 4 exhaust vents for optimum airflow matte finish exceeds ECE 22.05 & DOT certifications

The all-new V1 Youth PRZM helmet has been redesigned from the ground up. It now features our the Magnetic Visor Release System (MVRS) to manage rotational forces. This pro-level, patent-pending feature removes the three visor screws and replaces them with magnets to allow the visor to release from the helmet in the event of a crash, while also securely staying in place when needed. The design offers far more airflow than its predecessors for improved comfort and moisture management in warm riding conditions. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. And of course, it has a brand-new aesthetic and is available in a wide selection of colors and graphics to match nearly any gear set available. Features: MVRS - Magnetic Visor Release System releases in the event of a crash lightweight injection molded polycarbonate & ABS (acrylnitril-butadien-styrol-copolymer) shell construction 1 shell and 1 EPS size removable and washable comfort liner and cheek pads 9 intake and 4 exhaust vents for optimum airflow matte finish exceeds ECE 22.05 & DOT certifications

FOX V1 Werd Motocross Helmet Ounce for ounce, the V1 Werd helmet is one of the most competitive motocross helmets in the market. It features the FOX exclusive Magnetic Visor Release System™ (MVRS) which helps to manage rotational forces. The visor is designed to release from the helmet in the event of a crash while staying securely in place when needed. The design offers best-in-class airflow for improved comfort and moisture management. With four specific shell and EPS sizes, it has a more true-to-size fit and feel. The V1 comes complete with a removable and washable liner and cheek pads for comfort after repeated uses. Features: Magnetic Visor Release System (MVRS)™ releases in the event of a crash Lightweight Injection molded polycarbonate & ABS shell construction disperses energy in the event of a crash 4 shell and 4 EPS sizes for a precise fit Removable and washable comfort liner and cheek pads 9 intake and 4 exhaust vents for optimum airflow Exceeds ECE 22.05 standards

FOX V2 Hayl Motocross Helmet The Fox V2 Hayl Helmet is expertly crafted inside and out, providing reliable protection and a graphically stunning design. The helmet exceeds both ECE 22.05 and D.O.T certifications. A fiberglass shell provides durability, and a dual density EPS liner offers trustworthy defense should you end up taking a soil sample. The MX helmet has exceptional ventilation to prevent overheating on warm days at the track. Eleven intake and four exhaust vents provide fresh air and allow heat to escape. This system supplies cooling relief from the smoldering heat. Features: All new Fluid Inside™ is designed to help dissipate rotational and linear energy transmitted to the rider’s brain in the event of a crash Magnetic Visor Release System (MVRS)™ releases in the event of a crash Dual density Varizorb™ EPS liner is meant to provide improved protection by spreading the forces of impact across a wider surface area Lightweight Injection molded PC & ABS shell construction disperses energy in the event of a crash 4 shell and 4 EPS sizes for a precise fit EPP/PU Chin bar maintains lower weight while helping to manage energy during impact Removable, washable XT2® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture away from the head 11 intake and 4 exhaust vents for optimum airflow Meets or exceeds ECE 22.05 standards Gloss finish

FOX V2 Kresa Motocross Helmet The all-new V2 Kresa Helmet is the most technologically advanced moto helmet FOX have ever offered. The tech-rich update includes an arsenal of revolutionary features including Fluid Inside® and Fox's proprietary MVRS. Features: Fluid Inside™ is designed to help dissipate rotational and linear energy transmitted to the rider’s brain in the event of a crash Magnetic Visor Release System (MVRS) allows the visor to detach during a crash Dual-density Varizorb™ EPS liner is meant to provide improved protection by spreading the forces of impact across a wider surface area Lightweight  Injection molded PC & ABS shell construction disperses energy in the event of a crash 4 shell and EPS sizes for best in class fit EPP/PU Chin bar maintains lower weight while helping to manage energy during impact Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture away from the head 11 intake and 4 exhaust vents for optimum airflow Meets or exceeds ECE 22.05 standards

FOX V2 Kresa Motocross Helmet The all-new V2 Kresa Helmet is the most technologically advanced moto helmet FOX have ever offered. The tech-rich update includes an arsenal of revolutionary features including Fluid Inside® and Fox's proprietary MVRS. Features: Fluid Inside™ is designed to help dissipate rotational and linear energy transmitted to the rider’s brain in the event of a crash Magnetic Visor Release System (MVRS) allows the visor to detach during a crash Dual-density Varizorb™ EPS liner is meant to provide improved protection by spreading the forces of impact across a wider surface area Lightweight  Injection molded PC & ABS shell construction disperses energy in the event of a crash 4 shell and EPS sizes for best in class fit EPP/PU Chin bar maintains lower weight while helping to manage energy during impact Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture away from the head 11 intake and 4 exhaust vents for optimum airflow Meets or exceeds ECE 22.05 standards

FOX V2 Vlar Motocross Helmet The Fox V2 Vlar Helmet is expertly crafted inside and out, providing reliable protection and a graphically stunning design. The helmet exceeds both ECE 22.05 and D.O.T certifications. A fiberglass shell provides durability, and a dual density EPS liner offers trustworthy defense should you end up taking a soil sample. The MX helmet has exceptional ventilation to prevent overheating on warm days at the track. Eleven intake and four exhaust vents provide fresh air and allow heat to escape. This system supplies cooling relief from the smoldering heat. Features: All new Fluid Inside™ is designed to help dissipate rotational and linear energy transmitted to the rider’s brain in the event of a crash Magnetic Visor Release System (MVRS)™ releases in the event of a crash Dual density Varizorb™ EPS liner is meant to provide improved protection by spreading the forces of impact across a wider surface area Lightweight Injection molded PC & ABS shell construction disperses energy in the event of a crash 4 shell and 4 EPS sizes for a precise fit EPP/PU Chin bar maintains lower weight while helping to manage energy during impact Removable, washable XT2® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture away from the head 11 intake and 4 exhaust vents for optimum airflow Meets or exceeds ECE 22.05 standards

FOX V3 Idol Motocross Helmet The all-new V3 Idol Helmet is the most technologically advanced moto helmet we have ever offered. It builds off its championship-winning heritage with a new highly ventilated design and a systematic approach to protecting you from both linear and rotational impacts. The tech-rich update includes an arsenal of revolutionary features including Fluid Inside® and Fox's proprietary MVRS. Worn and refined by the fastest racers on the planet, the V3 is made for motocross champions. Features: Fluid Inside™ is designed to help dissipate rotational and linear energy transmitted to the rider’s brain in the event of a crash Magnetic Visor Release System (MVRS) allows the visor to detach during a crash Dual-density Varizorb™ EPS liner is meant to provide improved protection by spreading the forces of impact across a wider surface area Patent-pending chin bar/eye port CAGE™ is intended to improve energy management in the event of an impact MCT (Multi Composite Technology) Shell construction that blends Carbon and FRP resins to provide a light yet rigid external shell Injected Mesh vent screens provide superior ventilation and airflow, while maintaining protection from dirt and debris Removable, washable X-Static® comfort liner and cheek pads are antimicrobial and manage odor while wicking moisture away from the head 4 shell and EPS sizes for best in class fit Meets or exceeds ECE 22.05 standards

Large Eye Port: Optimal visibility and superior goggle fit Plush, Nylex Interior Removable and washable ACS Advanced Channeling Ventilation System Full front-to-back airflow flushes heat and humidity up and out the rear of the helmet Polycarbonate Composite Shell Lightweight, superior fit and comfort using advanced CAD technology Construction: Injection Molded Polycarbonate Composite Weight: 1335 g (based on size M)

Advanced Polycarbonate shell : Lightweight, Superior fi t and comfort using advanced CAD technology. Features: advanced Polycarbonate shell lightweight superior fit and comfort advanced CAD technology a perfect goggle fit shell design: dual positions for goggle band to provide comfort and perfect goggle fitment superior ventilation: 9 intakes, 4 exhaust ventilation channels to keep head cool and comfortable spacious chin area enables rider to breathe comfortably Sliding Layer Impact Distribution (SLID) : SLID reduces rotational acceleration caused by oblique impacts aerodynamic and adjustable peak visor: reduces lift at high speeds. adjustable peak visor postion for any circumstance Domestic equipments: removable and washable lining cervical collar compatible D-Ring shatterproof visor google prepared suitable for spectacle wearers 2 helmet shell sizes complies with ECE-22.05 weight: approx. 1415 g (size M)

Advanced Polycarbonate shell : Lightweight, Superior fi t and comfort using advanced CAD technology. Features: advanced Polycarbonate shell lightweight superior fit and comfort advanced CAD technology a perfect goggle fit shell design: dual positions for goggle band to provide comfort and perfect goggle fitment superior ventilation: 9 intakes, 4 exhaust ventilation channels to keep head cool and comfortable spacious chin area enables rider to breathe comfortably Sliding Layer Impact Distribution (SLID) : SLID reduces rotational acceleration caused by oblique impacts aerodynamic and adjustable peak visor: reduces lift at high speeds. adjustable peak visor postion for any circumstance Domestic equipments: removable and washable lining cervical collar compatible D-Ring shatterproof visor google prepared suitable for spectacle wearers 2 helmet shell sizes complies with ECE-22.05 weight: approx. 1415 g (size M)

J12 Aster Carbon Helmet

J12 Dominator

J12 Flame Carbon Helmet - Various Colours

j12 Flame

J12 Rockstar Dominator Helmet

J12 Unit Helmet blue

J12 Unit

TECHNICAL DETAILS Weight: 1250gr +/- 50gr (ECE) | 1330gr +/- 50gr (DOT) Certification: ECE 22-05 (also available DOT version) TECHNICAL FEATURES Fiberglass External Shell 2 Shell Sizes 2 Eps Sizes J.1.E.R. Emergency Cheek Pad Removal System Double D Retention System New Inner lining fitting for a better comfort Removable and washable inner lining PROTX2™ Antimicrobial Technology new lining treatment 9 Intake and 6 exhaust vents Peak extension included Sizes: Small Shell ( XS / S / M ) From 53 To 58 cm Big Shell ( L / XL / XXL ) From 59 To 63 cm ECE Certification - From 1250 Gr +/- 50 Gr DOT/ECE Certification - From 1330 Gr +/- 50 Gr

J18

J32 Pro Kick Helmet - Various Colours

Pro Rave Helmet

Just1 J32 Pro Swat Camo Motocross Helmet The J32 serves as Just1's first injection molded model. The Swat Camo edition comes with a cool and unique print! Features: Multiple air ventilation system Inner lining removable and washable Emergency cheek pad removal system Neckbrace ready Specifications: Thermoplastic shell Double-D retention system ECE 22/05 Weight ca. 1260g Model index: XS: 53-54 cm S: 55-56 cm M: 57-58 cm L: 59-60 cm XL: 61-62 cm Contents: 1 x Just1 J32 Pro Swat Camo Motocross Helmet

As always been a brand characterized by high quality, JUST1 has decided to launch an entry level with an unbeatable quality / price ratio to allow everyone to be able to wear a JUST1 helmet. This is the brand new J38, a helmet whose price starts at just 109 euros and has technical characteristics that are the envy of its most expensive competitors. Modern design, finds its true strength in simplicity. Only one graphic, BLADE, in seven colors, with only one cap from XS to XL and ECE homologation. Also available in Rockstar Energy graphics, matt, gritty and always fashion. TECHNICAL DETAILS Weight: 1320g +/- 50g Certification: ECE 22-05 (also available DOT version) TECHNICAL FEATURES Technical High quality thermoplastic resin shell Multiple and effective ventilation system Anti-intrusion metal mesh at the air intakes Removable and washable interior Prepared for neck brace Adjustable peak Double D retention system

Thermoplastic Externall shell Removable and washable liner Removable and washable cheek pads Helmet interior anatomically designed Painted and UV-coated outer shell lower edges with protection rubber Adjustable peak Ventilation system double-D closure

Oneal 2 Series Attack Youth Motocross Helmet Oneal is one of the pioneers and groundbreakers in the field of MX apparel. The desire for better equipment, tailored to the needs of the drivers and the desire for higher performance were the motives leading Oneal to found this company. Product development is a central aspect of Oneals philosophy. This is exactly what the Oneal 2 Series Attack Youth Motocross Helmet reflects. The MX helmet convinces by its design without sacrificing quality. Features: the shell is constructed of ABS several air vents for optimal ventilation and cooling matt finish long-lasting, multi-colored graphics ultra-plush removable, sweat-absorbing and washable padded inner lining safe eyeglass strap guidance due to preformed shell design height adjustable screen Airflaps™ compatible Specifications: sizes: S-L weight: 1100g (+/- 50g) closure: Double-D safety norms: DOT and ECE 22.05 Contents: 1 x Oneal helmet 1 x Oneal helmet bag

Oneal 2Series Villain Youth Motocross Helmet Oneal is one of the pioneers and groundbreakers in the field of MX apparel. The desire for better equipment, tailored to the needs of the drivers and the desire for higher performance were the motives leading Oneal to found this company. Product development is a central aspect of Oneals philosophy. This is exactly what the Oneal 2Series Villain Youth Motocross helmet reflects. The MX helmet convinces by its design without sacrificing quality. Features: the shell is constructed of ABS several air vents for optimal ventilation and cooling shiny finish long-lasting, multi-colored graphics ultra-plush removable, sweat-absorbing and washable padded inner lining safe eyeglass strap guidance due to preformed shell design height adjustable screen Airflaps™ compatible Specifications: sizes: S-L weight: 1150g (+/- 50g) closure: Double-D safety norms: DOT and ECE 22.05 Contents: 1 x Oneal helmet 1 x Oneal helmet bag

Oneal 2Series Wild Youth Motocross Helmet Oneal is one of the pioneers and groundbreakers in the field of MX apparel. The desire for better equipment, tailored to the needs of the drivers and the desire for higher performance were the motives leading Oneal to found this company. Product development is a central aspect of Oneals philosophy. This is exactly what the Oneal 2Series Wild Youth Motocross helmet reflects. The MX helmet convinces by its design without sacrificing quality. Features: the shell is constructed of ABS several air vents for optimal ventilation and cooling shiny finish long-lasting, multi-colored graphics ultra-plush removable, sweat-absorbing and washable padded inner lining safe eyeglass strap guidance due to preformed shell design height adjustable screen Airflaps™ compatible Specifications: sizes: S-L weight: 1100g (+/- 50g) closure: Double-D safety norms: DOT and ECE 22.05 Contents: 1 x Oneal helmet 1 x Oneal helmet bag

Shoei VFX-WR Allegiant Motocross Helmet The Shoei VFX series has always been a pioneer and style icon for all off-road helmets. The innovative design and the high quality, coupled with novel technology, not only distinguished the helmet in the past but are also the basis of the eagerly awaited VFX-WR. For offroad helmets it is first and foremost a matter of offering the best possible safety with very good workmanship. But also a fresh and aggressive styling plays a decisive role. With its characteristic design, the VFX-WR continues the path of its predecessor models at first glance. The unmistakable ribbed shape on the back of the helmet for a better grip of the VFX-W's strap is now continued in the lateral area of the successor VFX-WR. This makes it even easier to optimally position the strap and ensure a good fit at all times. This greater freedom of design is made possible by a novel Shoei technology in the production of the helmet shell. Thus, helmet and visor also form a harmonious transition, since the three-dimensional design of the visor can for the first time continue into the helmet shell. The changes to the chin section are also striking. The edges of the visual field recess and the chin section were partially pulled completely towards the mouthpiece in order to integrate it more strongly into the overall design of the helmet and to create an even more seamless transition. The outer helmet shell of the VFX-WR is manufactured in the extremely stable AIM+ structure and consists of six different fibreglass and organic fibre layers which guarantee the best possible distribution of the impact energy. A completely new feature of the VFX-WR is the Motion Energy Distribution System (M.E.D.S.), which reduces rotational forces. The EPS core consists of a separate element in the upper head area, the dome of which rests on the base core. In the event of an impact, these domes absorb additional energy and effectively reduce the rotational forces that occur particularly in off-road sports. In addition, the EPS core of the VFX-WR consists, as usual, of several styrofoam elements with different degrees of hardness in order to optimally protect more shock-sensitive areas of the head. The shell and core are manufactured in four different sizes to show off their advantages in every size. The VFX-WR not only guarantees optimum functionality but also the most comfortable fit possible. Attention was also paid to the topic of mass centralisation, so that the VFX-WR's focus is much more central. This relieves the neck muscles and prevents signs of fatigue. Features: AIM+ helmet shell (organic fibreglass, multifibre and high performance organic fibre in different layers for a shock-absorbing shell with optimum stiffness) M.E.D.S. (Motion Energy Distribution System / additional EPS liner reduces rotational energy in the event of a fall) 3-part modular polystyrene core system (protection optimisation through polystyrene core elements with different degrees of damping) E.Q.R.S. (Emergency Quick Release System / for simplified helmet removal by removing the cheek pads in an emergency case) Double-D closure (easy handling, always perfectly adjusted) mud guard included (protection against falling stones) 4 helmet outer shells of different sizes (for optimum fit and most compact size) removable and washable 3D Max Dry cheek pads (breathable and moistures absorbing, different pad sizes (31, 35, 39, 43 mm) for perfect fit optionally available) removable and washable 3D Max Dry head cushion (for easy cleaning, breathable and moisture absorbing) removable and washable chinstrap padding (for better care) multiple aeration and ventilation (for optimum ventilation even in the hottest racing situations) several inlets in the forehead area and at the top of the head (to introduce fresh air) additional outlets at the back of the head and in the neck area (to dissipate the warm, stale air) specially developed helmet shell (radically sporty design with integrated spoilers for optimum aerodynamics and performance) fully integrated helmet shield (seamless connection between helmet shell and helmet shield, new helmet shield positioning system) aggressively designed and enlarged nose cover (for reduced wind resistance and improved breathing air supply)

SHOEI’s VFX-Series has been leading the off-road helmet industry with its bold, innovative design and exceptional safety features for years – with the introduction of the new VFX-WR, the bar has once again been raised for what is considered to be premium head safety. Whilst the aggressive design of its predecessors is still instantly recognizable, the new VFX-WR pushes the boundaries of evolution, incorporating years of SHOEI research and development, which has resulted in the VFX-WR leading the way in a new era of off-road helmets. SHOEI has adopted an all new impact absorbing liner mechanism into the VFX-WR – the M.E.D.S. (Motion Energy Distribution System), which is more technically advanced than any existing conventional dual liners. While the main layer of EPS liner absorbs impacts from the outside as usual, an additional centred layer of EPS liner reduces rotational acceleration energy to the head in the event of an accident. Anchored by a larger centre column, the inner layer swings during impact, allowing its three perimeter columns to absorb the energy. The result is a significant reduction of rotational force to the rider’s head. The SHOEI VFX-WR comes in six sizes (XS-XXL), which are covered by four different helmet shell sizes consisting of SHOEI’s renowned Multi-Ply Matrix AIM+ Shell. Of course, the lid is equipped with all the features you expect from a SHOEI helmet – from a top-notch ventilation with 16 intakes/outlets to keep your head cool, to optimum comfort with a fully removable and washable 3D Max-Dry Interior System. The renowned Emergency Quick Release System (E.Q.R.S.) and an extra wide front opening to give good peripheral vision and accommodate all popular brands of MX-googles round out the picture. The VFX-WR is the perfect choice for all off-road riders! Safety Shell in AIM +. Organic fibreglass, multi-composite and high performance organic fibre in various layers for a shock-absorbant shell with optimum rigidity. EPS liner system with two densities. Optimised protection through EPS elements with different shock-absorbing levels. EQRS (Emergency Quick Release System) simplifies helmet removal by removing the cheek pads in the event of an accident Double-D ring. Easy to use and always perfectly adjusted. Mud guard and original SHOEI helmet bag comes with the helmet Comfort 4 different outer shell sizes 1270gr (+/- 30gr) at size 'M' Detachable and washable 3D Max-Dry cheek pads Detachable and washable 3D Max-Dry centre pad Detachable and washable Max-Dry chin strap cover Ventilation Multiple venting and extraction - especially easy to clean Several intake vents on the brow area and on the upper head area Outlet vents on the back of the head Aerodynamic Brand new shell construction, in a radical new, sporty design with integrated spoilers, for optimised aerodynamics and performance Visor in a new design, extra large for perfect protection from sun and mud Aggressively-shaped face guard

The New VFX-WR – The Evolution of an Icon SHOEI’s VFX-Series has been leading the off-road helmet industry with its bold, innovative design and exceptional safety features for years – with the introduction of the new VFX-WR, the bar has once again been raised for what is considered to be premium head safety. Whilst the aggressive design of its predecessors is still instantly recognizable, the new VFX-WR pushes the boundaries of evolution, incorporating years of SHOEI research and development, which has resulted in the VFX-WR leading the way in a new era of off-road helmets. SHOEI has adopted an all new impact absorbing liner mechanism into the VFX-WR – the M.E.D.S. (Motion Energy Distribution System), which is more technically advanced than any existing conventional dual liners. While the main layer of EPS liner absorbs impacts from the outside as usual, an additional centred layer of EPS liner reduces rotational acceleration energy to the head in the event of an accident. Anchored by a larger centre column, the inner layer swings during impact, allowing its three perimeter columns to absorb the energy. The result is a significant reduction of rotational force to the rider’s head. The SHOEI VFX-WR comes in six sizes (XS-XXL), which are covered by four different helmet shell sizes consisting of SHOEI’s renowned Multi-Ply Matrix AIM+ Shell. Of course, the lid is equipped with all the features you expect from a SHOEI helmet – from a top-notch ventilation with 16 intakes/outlets to keep your head cool, to optimum comfort with a fully removable and washable 3D Max-Dry Interior System. The renowned Emergency Quick Release System (E.Q.R.S.) and an extra wide front opening to give good peripheral vision and accommodate all popular brands of MX-googles round out the picture. The VFX-WR is the perfect choice for all off-road riders! Safety Shell in AIM +. Organic fibreglass, multi-composite and high performance organic fibre in various layers for a shock-absorbant shell with optimum rigidity. EPS liner system with two densities. Optimised protection through EPS elements with different shock-absorbing levels. EQRS (Emergency Quick Release System) simplifies helmet removal by removing the cheek pads in the event of an accident Double-D ring. Easy to use and always perfectly adjusted. Mud guard and original SHOEI helmet bag comes with the helmet Comfort 4 different outer shell sizes 1270gr (+/- 30gr) at size 'M' Detachable and washable 3D Max-Dry cheek pads Detachable and washable 3D Max-Dry centre pad Detachable and washable Max-Dry chin strap cover Ventilation Multiple venting and extraction - especially easy to clean Several intake vents on the brow area and on the upper head area Outlet vents on the back of the head Aerodynamic Brand new shell construction, in a radical new, sporty design with integrated spoilers, for optimised aerodynamics and performance Visor in a new design, extra large for perfect protection from sun and mud Aggressively-shaped face guard

VFX-WR Zinger MX Helmet

VFX-WR Zinger MX Helmet - Various Colours

VFX-WR Zinger MX Helmet - Various Colours

MX Enigma Helmet

Sector Bomber Mips Helmet - Various Colours

Sector Shear Helmet - Various Colours

Sector Shear Youth Helmet