Tubeless Motorcycle Tyre Repair Kit

This Compact, easy to carry kit includes all the tools to repair a flat tyre on the roadside. Kit is designed for Tubeless tyres

What's in the box
1x Rasp Tool
1x Insert needle tool
5x Strings
3 X C02 cartridges
1x Small Knife
1x Tube plug cement
1x C02 Canister valve adapter

The MXS 5.0 combines an advanced micro-processor controlled battery charger with a battery and alternator test function to provide the ultimate in battery testing, charging and maintenance. It offers selectable small battery and normal battery programs. The RECOND and AGM options operate individually or together in both small battery and normal battery programs providing great flexibility to the users.

 

Special reconditioning function that restores stratified & deeply discharged batteries
Unique maintenance charging
Mode for optimised charging during cold winter days
The MXS 5.0 is a fully automatic 8-step charger that delivers selectable 0.8A or 5A to 12V batteries from 1.2-110Ah
It is delivered with a 5-year warranty.
The charger is IP 65 classified (splash and dust proof)
Charger is designed to protect vehicle electronics and non-sparking
Reverse polarity protected and short-circuit proof

Ctek - AC/DC 0.8A Charger
The 0.8A AC/DC charger, charges batteries up to 32Ah and the fully automatic 6 step charging includes patented desulphation and pulse maintenance. The compact tough design is splash resistant and dust proof to IP65, perfect for smaller 12V batteries that are found in motorcycles, jet skis, ATVs and lawnmowers

Features:
- Charges batteries up to 32Ah
- The fully automatic 6 step charging includes patented desulphation and pulse maintenance
- The compact tough design is splash resistant and dust proof to IP65
- Perfect for smaller 12V batteries that are found in motorcycles, jet skis, ATVs and lawnmowers
- Model: XS0.8
- Voltage: 220V

Suitable for all motorcycles, ATVs, Jet Skis and snowmobiles
AGM program
Fully automatic charging including maintenance mode
Recond program for reconditioning deeply discharged batteries
5-year warranty

- Valve core remover designed for quick operation.
- Remover tip is made of chrome molybdenum steel.
- Aluminum kunrled grip.

- Useful during tire changes and flat repairs.
- Easy to pull the air valve stem through the hole on the rim.
- Air valve puller head may also be used for air valve core removal.

- Keeps the tire bead down during the tire change.
- Hooks over the spoke and pushes down on the bead for easy tire installation.
- Durable rubber grip for easy operation.

- Used to inject lubricant into cable housing.
- Available in 3 hard anodized colors.
- Body and bolt are made of high-grade aluminum.

Drive chain cleaning brush.
- "L" shaped brush easily cleans the chain.
- Aluminum tube handle designed for comfortable operation.
- Available in blue, red and titanium anodized handle colors.

- Protects the plugs in your tool box.
- Available in 3 sizes.
- The clear cap allows you to identify the plug without opening.
- High-impact plastic construction

- Interchangable tips to fit 8 sizes of spoke nipples.
- Main shaft is CNC precision machined from 7075A aluminum, and designed for optimum grip.
- Tips are made of heat treated steel for strength.
- Available in 3 hard anodized colors.

- Designed for all types of tire changing needs.
- The bend of the lever and wide spoon area is designed for quick and easy tire removal.
- The durable rubber grip provides better grip.

- One end fits the axle nut, the other end is a tire tool.
- Made of heat treated steel.

- Keeps the tire bead down during the tire change.
- Hooks over the spoke and pushes down on the bead for easy tire installation.
- Durable rubber grip for easy operation.

- Spoke wrench for your CRF/XR50, DRZ50/70 and KX65
- Tip size is 4.0 mm for stock CRF/XR50, DRZ50/70 and KX65 spoke nipple, 5.0mm size for after market spoke nipple.
- Made of durable steel.

- Easy exhaust spring removal.
- Excellent grip with the PVC coated handle.

- Wrench for steering stem nut.
- Compact head design for easy operation at narrow stem space.
- Loosens stem nut size.
- Handy size, wrench thickness : 6.0mm.- Made of durable steel, electro coating finish with DRC logo.

- Wrench can be used for most of motorcycle engine plugs.
- Comes with 4 different wrench sizes.
- Made of durable steel with black electro coating finish for less corrosion.
- Can be used for helmet visor screws.

- Standard tire lever.
- Long length for easy operation for hard tire removal.
- Made of durable heat treated steel.

he Excel Spoke Torque Wrench Set is easily adjustable from 0-60 inch-pounds and comes with 6 tips, a Spline drive, 5.8, 6.1mm, 6.3mm, 6.5mm and 6.7mm & 6.9mm.

Complete with a conversion table to convert inch-pounds into Newton-meters and kilograms.

Also includes Spoke Spanner for assembling wheels.

Finished in a Hard Cover carry case for longevity.

60 Piece Toolbox

Optimizes battery power and life
Saves neglected batteries
Safe long-term maintenance cycle
Tests battery every hour
Recommended by 10 power sport manufacturers

The most ADVANCED & TRUSTED battery charger in power sports!
OptiMate 4 Dual Program includes two charging programs; program 1 is for direct charging of a battery, program 2 allows safe and unsupervised charging through a BMW motorcycle’s CAN-bus controlled 12V socket. OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts.

Special features in CAN-bus program:Automatic KEY-LESS activation and continued maintenance until charger is disconnected.
Safe low voltage pulse desulphation.

CHARGING AMPS : 1A (constant current)
USE : Indoor / Outdoor  (lowest temperature: -40°F / -40°C).
SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode).
IDEAL FOR : STD, AGM & GEL 12V batteries from 3 – 50Ah.
INPUT : Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
STYLE : Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.
SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.

Unique LiFePO4 battery protection. 8-Step 12.8/13.2V 0.8A Battery saving charger-tester-maintainer. The Optimate Lithium 0.8A 4S charges LiFePO4 / LFP (Lithium Iron Phosphate) 4-series batteries with nominal voltage of 12.8V - 13.2V.

Features:
- Saves low voltage LiFePO4 batteries
- Specialized LiFePO4 charge cycle
- Maintains & protects LiFePO4 batteries
- Battery BMS reset

• Reads a choice of pressure scales: PSI/BAR/kPa/KG/CM2
• Digital readings
• Automatic shut-off
• Fits Schraeder valves

• Digital display
• Rotating dual valve system: Schrader and Presta
• Spare battery included
• Anti-shock case
• Flashlight
• Choice of pressure scales
• Large backlit display for easy reading

This versatile tool is ideal for motorcycle, automotive and industrial users and will fit a wide range of applications from 65-105 mm diameter. The soft ergonomic handle is designed to provide the user with a safe, firm and efficient grip when adjusting to the required level of grip.

Durable steel construction

Size range: 65-105mm

Soft grip

Designed for the installation and removal of filters and filer cartridges with one hand

Fully adjustable

Suitable for hard-to-reach filter housing

Adjustment on the filter by turning the wheel on the end of the handle

Material: SK5 steel grip, aluminium, TPR soft grip

A 28 piece motorcycle tool kit, Ergonomic, soft gel handles which are comfortable to use. Made from high quality carbon steel. A compact storage case, ideal to keep under your rear set which folds down to 18cm x 10.5cm x 4cm

Includes:

1. 10pc screwdriver bit set
2. Extension bar
3. 5pc hex key set (6mm, 5mm, 4mm, 3mm, 2mm)
4. Wire cutters
5. Screwdriver handle
6. Needle nose pliers
7. 5mm, 6mm, 7mm, 8mm, 9mm, 10mm & 11mm sockets
8. 2 x electrical screwdrivers

• A comprehensive 27 piece premium motorcycle tool kit
• Ergonomic, soft gel handles which are comfortable to use
• Chrome vanadium steel sockets, extension bar and hex keys for a durable life
• A compact storage case, ideal to keep under your rear seat which folds down to 18.5cm x 10.5cm x 4cm
• Mini ratchet handle with robust mechanism requires just 5 degrees movement to fasten
• Includes a 20mm adjustable mini spanner, suitable for most sizes of bolts on a motorcycle

Includes:

1. 10pc screwdriver bit set
2. Adjustable mini spanner
3. Extension bar
4. 5pc hex key set (6mm, 5mm, 4mm, 3mm, 2mm)
5. Mini wire cutters
6. Screwdriver handle
7. Mini needle nose pliers
8. Mini ratchet handle
9. 8mm, 10mm, 12mm, 13mm & 14mm sockets
10. Cable ties (2.5mm x 100mm - black)

• Conversion tool for use on forecourt air lines and other inflexible tyre inflators
• Allows connector access in confined spaces
• Reduces the risk of damage to the bike
• Enable more accurate pressure reading
• Compact- fits in to your pocket or toolkit

RAC610 analogue tyre inflator with three piece adaptor kit ideal for inflating sport balls and small inflatables. The inflator comes fitted with a fused 12V power plug and approx. 2.9m cable that stretches the full length of a standard car, allowing back tyres to be easily reached and checked. Inflates a tyre to 35PSI in under 4.5 min - saving you time. The gauge displays pressure in PSI, kg/cm2 or BAR for reliable and accurate performance.

The RTG5 digital tyre gauge provides accurate tyre pressure readings – meaning you know when to top-up your tyres. The gauge shows your tyres\\\\\\\' pressure on an easy-to-read, backlit digital screen, and can display readings in either PSI, kPA, BAR or kg/cm2. Likewise, the innovative 360 degrees rotating nozzle means you can always take a reading with ease.

The Tusk Shock Preload Adjusting Tool is the Ideal tool for adjusting the shock preload on your motorcycle or ATV. The optimal length and rounded angled tip enables it to fit nicely in the notched collars making preload adjustments easy. The Preload adjusting tool is made from heat treated carbon steel with a Zinc coating to ensure durability.